Análisis e interpretación de las fuerzas actuantes en el pistón según el desplazamiento angular del cigüeñal

Autores/as

DOI:

https://doi.org/10.37431/conectividad.v7i2.518

Palabras clave:

Tren alternativo, Cigüeñal, Modelado matemático, Presión en cilindro, Fuerzas mecánicas

Resumen

El estudio analizó la dinámica del tren alternativo de un motor de gasolina de cuatro tiempos mediante un modelo matemático implementado en Microsoft Excel. Se evaluaron 73 posiciones del cigüeñal, desde 0° hasta 720° en intervalos de 10°, considerando la presión del cilindro y las fuerzas F, NE, KE, TE y ZE. Las curvas permitieron examinar la transmisión de cargas entre el pistón, la biela y el cigüeñal durante las fases de admisión, compresión, expansión y escape del motor. La presión máxima calculada fue de 3175,14 kPa a 370°. En esa posición, la plantilla registró los máximos de F (180,17 kN), KE (180,18 kN) y ZE (177,28 kN). Los máximos de NE (1446,71 N) y TE (50,58 kN) ocurrieron a 390°, lo que evidencia la influencia de la geometría del mecanismo sobre la distribución angular de las fuerzas. El análisis de Pearson mostró asociaciones casi perfectas entre F y KE y entre NE y TE, así como correlaciones fuertes entre F y ZE (r = 0,979) y entre KE y ZE (r = 0,978). Estas asociaciones responden, en parte, a las ecuaciones que vinculan las variables. Se identificó una inconsistencia dimensional en la conversión de presión y área a fuerza; por ello, las magnitudes absolutas reportadas requieren corrección antes de interpretarse físicamente. El modelo describe tendencias y posiciones críticas, pero su utilidad para evaluar esfuerzos reales exige revisar las unidades, incorporar inercia y fricción, y contrastar las curvas con mediciones experimentales de presión y par motor.

Citas

Almansoori, A. Q., Hajialimohammadi, A., Agha Mirsalim, S. M., & Mehrabivagha, M. (2022). Multi-objective Optimization and Sensitivity Analysis of the Parameters Affecting Sealing Performance of the Piston Rings Face through the Validated Model for the Four-stroke Bi-fuel Engine. Journal of Applied Fluid Mechanics, 15(5), 1345-1360. https://doi.org/10.47176/jafm.15.05.1073

Arunkumar, A., Sooriyamoorthy, A., Mishael, C., & Giri, A. (2022). A study on engine piston optimization by generative design approach. IOP Conference Series: Materials Science and Engineering, 1228(1), 1-12. https://doi.org/10.1088/1757-899x/1228/1/012014

Biet, C., & Krebs, S. (2022). Determination of Optimal Piston Trajectories for High Efficiency 4-Stroke Cycles by Using Predictive Combustion Modeling. Thermo, 2(4), 352-370. https://doi.org/10.3390/thermo2040024

Cakir, M. (2021). Experimental dynamic analysis of the piston assembly of a running single-cylinder diesel engine. Journal of Marine Engineering & Technology, 20(4), 235-242. https://doi.org/https://doi.org/10.1080/20464177.2019.1665257

Huping, A., & Shaowei, A. (2025). Kinematic and mechanical models of internal combustion engines and their characteristics. Proc.SPIE, 13965, 1050-1060. https://doi.org/10.1117/12.3092860

Mena Navarrete, L. A. (2011). Compilador de ejercicios de motores de combustión interna Diesel-Gasolina. Nueva Aurora.(págs. 48). Ecuador, Quito.

Mnati, H. M., Hammami, M., Ksentini, O., & Abbes, M. S. (2025). Study of Four-Stroke Engine Vibrations: Influence of Friction and Thermal Effects on Piston Speed, Displacement, and Acceleration. Journal of Techniques, 7(3), 70-81. https://doi.org/10.51173/jt.v7i3.2700

Nunes, A., & Brojo, F. (2022). Experimental Study of a Novel 4 Stroke Spark Ignition Geared-Hypocycloid Engine. ASME 2022 International Mechanical Engineering Congress and Exposition, 3. https://doi.org/10.1115/imece2022-95368

Ortolani, P., & Hall, A. (2022). Piston Concept, Design and Testing for Extreme High Efficiency Internal Combustion Engine Development. WCX SAE World Congress Experience, 1, 15. https://doi.org/10.4271/2022-01-0598

Perez, A., Valdes, A., Niño, G., Tamayo, C., Roman Flores, A., & Cuan-Urquizo, E. (2022). Mass Reduction and Enhanced Geometry of a 0.196 Liters Small IC Engine Piston Through Topology Optimization Simulation and Finite Element Analysis. Fuels & Lubricants Conference & Exhibition, 1. https://doi.org/10.4271/2022-01-1115

Pham, V. C., Kim, J. K., Lee, W.-J., Choe, S.-J., Le, V. V., & Choi, J.-H. (2022). Effects of Piston Bowl Geometry on Combustion and Emissions of a Four-Stroke Heavy-Duty Diesel Marine Engine. Applied Sciences, 12(24), 13012. https://doi.org/10.3390/app122413012

Pol, G. J., Jadhav, A. R., Shinde, J. G., Patil, Y., & Lokapure, R. B. (2023, march 31st). Design, Development and Analysis of the Electromagnetic Engine. National Conference on Emerging Trends in Engineering and Technology (NCETET-2023), Kolhapur, India. https://www.researchgate.net/publication/371350854_Design_Development_and_Analysis_of_the_Electromagnetic_Engine

Tretjakovas, J., & Juknelevičius, R. (2025). The Analysis of Bending Moment in Connecting Rod Caps for Internal Combustion Engines. En O. Prentkovskis, I. Yatskiv (Jackiva), P. Skačkauskas, M. Karpenko, & M. Stosiak (Eds.), Internactional Conference TRANSBALTICA XV: Transportation Science and Technology (pp. 649–658). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-85390-6_60

Ungureanu, L. M., Niculae, E., & Petrescu, F. I. T. (2022). Kinematic and dynamic study of a manipulator 1T6R. Independent Journal of Management & Production, 13(5), 1066-1092. https://doi.org/10.14807/ijmp.v13i5.1615

Descargas

Publicado

2026-11-19
Crossmark

Cómo citar

Passo Guamangate, R., Moncayo Condo, A. E., Moreta Tasinchano, K. J., Molina Morales, L. B., & Lisintuña Toapanta, E. P. (2026). Análisis e interpretación de las fuerzas actuantes en el pistón según el desplazamiento angular del cigüeñal. CONECTIVIDAD, 7(2), e518. https://doi.org/10.37431/conectividad.v7i2.518

Número

Sección

Artículos Científicos y Artículos de Revisión

Categorías

Artículos más leídos del mismo autor/a